LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 73 (Cruise Control System (Service Information) (Hybrid)) >> Cruise Control Main Switch >> Removal [02/2014 - ] >> Procedure

Removal [02/2014 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE HORN BUTTON ASSEMBLY 

    Refer to REMOVAL [02/2014 - ]

  2. REMOVE CRUISE CONTROL MAIN SWITCH 
    1. Remove the 2 screws.
      GTY446608Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector and remove the cruise control main switch as shown in the illustration.
      GTY455342Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals