LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 73 (Cruise Control System (Service Information) (Hybrid)) >> Cruise Control Main Switch >> Installation [02/2014 - ] >> Procedure

Installation [02/2014 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL CRUISE CONTROL MAIN SWITCH 
    1. Connect the connector and temporarily install the cruise control main switch as shown in the illustration.
    2. Install the cruise control main switch with the 2 screws.
      GTY446619Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 2.4 N*m (24 kgf*cm, 21 in.*lbf) 

  2. INSTALL HORN BUTTON ASSEMBLY 

    Refer to INSTALLATION [02/2014 - ]

scientia non olet · About LEMON Manuals