Removal [02/2014 - ]: Procedure
WARNING: This page is about a different variant/trim than selected.
- REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for Side)
Refer to PROCEDURE - Step 13
- REMOVE FRONT NO. 2 SPEAKER ASSEMBLY (for Side) NOTE:
Do not touch the speaker cone.
HINT:
Use the same procedure for the RH side and LH side.
- REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY (for Center)
Refer to PROCEDURE - Step 20
- REMOVE FRONT NO. 3 SPEAKER ASSEMBLY (for Center) NOTE:
Do not touch the speaker cone.