Caution / Notice / Hint

WARNING: This page is about a different variant/trim than selected.

NOTE:

If the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) must be initialized.
Refer to INITIALIZATION [02/2014 - ]
The panoramic moon roof system uses the LIN communication system. First, confirm that there are no malfunctions in the LIN communication system. Refer to How to Proceed with Troubleshooting.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [02/2014 - ]
DTC B2343 is stored in the sliding roof ECU (sliding roof drive gear assembly) and roof sunshade ECU (sliding roof drive gear assembly).

HINT:

If DTC B2342 and B2343 are output simultaneously, perform troubleshooting for DTC B2342 first.