LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Cooling System (1AR-FE) (Service Information) (Except Hybrid)) >> Thermostat >> Removal [12/2013 - ] >> Procedure

Removal [12/2013 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. DRAIN ENGINE COOLANT 

    See step  1 , or see step  1

  2. REMOVE GENERATOR ASSEMBLY 

    Refer to REMOVAL [12/2013 - ]

  3. DISCONNECT NO. 2 RADIATOR HOSE 

    Refer to PROCEDURE - Step 33 , or refer to PROCEDURE - Step 33

  4. REMOVE WATER INLET 
    1. Remove the 2 nuts and water inlet.
      GTY314625Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE THERMOSTAT 
    1. Remove the thermostat from the water inlet housing.
    2. Remove the gasket from the thermostat.