Caution / Notice / Hint

WARNING: This page is about a different variant/trim than selected.

Fig 1: Bolt Differences

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Centering Bolt
*b	Standard Bolt

HINT:

Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
Centering bolts are used to mount the door hinge to the vehicle body and door. The door cannot be adjusted with the centering bolts installed. Substitute the centering bolts with standard bolts when making adjustments.
Specified torque for standard bolts is shown in the standard bolt chart.
Refer to SPECIFIED TORQUE FOR STANDARD BOLTS [02/2014 - ]