LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 121 (Lighting System (Interior) - Service Information - (Hybrid)) >> Luggage Compartment Room Light >> Removal [11/2015 - ] >> Procedure

Removal [11/2015 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY 
    1. Using a screwdriver with its tip wrapped with protective tape, disengage the claw.
      GTY598005Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
    2. Disconnect the connector to remove the No. 1 luggage compartment light assembly.
  2. REMOVE LUGGAGE COMPARTMENT LIGHT BULB 
    1. Disengage the claw as shown in the illustration.
      GTY539127Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 claws and remove the shade from the No. 1 luggage compartment light lens indicated by the arrows, in the order shown in the illustration.
      GTY578489Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the luggage compartment light bulb from the No. 1 luggage compartment light lens as shown in the illustration.
      GTY539129Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002