LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander LE Plus, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (SFI System [2GR-FKS] - Diagnostic Codes - (Except Hybrid) (1 Of 4)) >> SFI System >> DTC P0190-2A: Fuel Rail Pressure Sensor "A" Signal Stuck in Range; DTC P0190-64: Fuel Rail Pressure Sensor "A" Signal Plausibility Failure [11/2016 - ] >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
CORRELATION MONITOR WITH BAROMETRIC PRESSURE

Fuel pressure sensor (for high pressure side) output Less than -1.3 MPa (-13.3 kgf/cm2 , -188.6 psi), or higher than 2 MPa (20.4 kgf/cm2 , 290 psi)
STUCK MONITOR

Fuel pressure sensor (for high pressure side) output deviation Less than 0.3 MPa (3.1 kgf/cm2 , 43.5 psi)