CD Sound Skips [12/2013 - ]: Procedure

1. Check that the CD is not deformed or cracked.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK

   No deformation or cracks on the CD

   Result

   Proceed to
   OK
   NG

Result:  2

NG 

END (CD IS FAULTY) 

Result:  1

OK 

See step  2

1. Check the CD.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK

   The CD is clean.

   NOTE:

   Do not use a conventional record cleaner or anti-static preservative.

   HINT: 

   If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

   Result

   Proceed to
   OK
   NG

Result:  2

NG 

CLEAN CD 

Result:  1

OK 

See step  3

1. Replace the CD with a known good one and check that the malfunction disappears.

   OK

   Malfunction disappears.

   Result

   Proceed to
   OK
   NG

Result:  1

OK 

END (CD WAS FAULTY) 

Result:  2

NG 

See step  4

1. Check the radio and display receiver assembly installation condition.
   1. Check that the radio and display receiver assembly is properly installed.

      OK

      The radio and display receiver assembly is properly installed.

   Result

   Proceed to
   OK
   NG

Result:  1

OK 

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY. Refer to  REMOVAL [12/2013 - ] 

Result:  2

NG 

REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY