LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander LE Plus, AWD >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belts (Service Information) (Except Hybrid) >> REAR CENTER SEAT INNER BELT ASSEMBLY (for Rear No. 2 Seat) >> Removal [11/2016 - ] >> Procedure

Removal [11/2016 - ]: Procedure

  1. REMOVE REAR NO. 2 SEAT ASSEMBLY 

    Refer to REMOVAL [11/2016 - ]

  2. REMOVE SEAT INNER BELT SUB-ASSEMBLY 
    1. Disengage the 4 fasteners.
      GTY692580Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Fastener
    2. Disconnect the connector.
    3. Remove the seat inner belt sub-assembly from the rubber band of the rear seat cushion assembly as shown in the illustration.
      GTY438589Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Rubber Band
scientia non olet · About LEMON Manuals