LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander LE Plus, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (SFI System (2GR-FXS) - Diagnostic Codes - (Hybrid) (1 Of 4)) >> SFI System >> DTC P1604: Startability Malfunction [11/2016 - ] >> Description

DTC P1604: Startability Malfunction [11/2016 - ]: Description

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

If the engine does not start or it takes a long time for the engine to start, despite the ECM receiving the engine start request signal from the hybrid vehicle control ECU assembly via CAN communication, this DTC will be stored.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P1604 Startability Malfunction Either of the following conditions is met (1 trip detection logic):
  • The engine speed is less than 500 rpm with the engine start signal on for a certain amount of time (refer to the illustration below)
  • After the engine starts (engine speed is 500 rpm or more), the engine speed drops to 200 rpm or less
- Does not come on DTC Stored
GTY318974Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002