DTC P122F: High Pressure Fuel Pump Boost Malfunction (High Temperature) [11/2016 - ]: Description
WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
When the engine temperature and engine load are high, if a boosting malfunction of the fuel pump assembly (for high pressure side) due to overheating is detected, this DTC is stored. The operating conditions at the time the DTC was stored are recorded as freeze frame data and can be checked using the Techstream. Using the freeze frame data, whether the driveability malfunction occurred due to a fuel pump assembly boosting malfunction can be judged, enhancing serviceability.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory |
|---|---|---|---|---|---|
| P122F | High Pressure Fuel Pump Boost Malfunction (High Temperature) | Both of the following conditions are met and the fuel pressure (for high pressure side) does not reach the target fuel pressure (1 trip detection logic):
|
- | Does not come on | DTC stored |
*: Vehicle speed 40 km/h (25 mph) or more, ambient temperature 23°C (73°F) or higher, 2 seconds or more after port injection stopped, engine coolant temperature 103°C (217°F) or higher and estimated engine oil temperature 115°C (239°F) or higher.