Typical Enabling Conditions
WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
CORRELATION MONITOR WITH BAROMETRIC PRESSURE
| All of the following conditions are met | - |
| Engine coolant temperature sensor malfunction (P0115, P0117, P0118) | Not detected |
| High pressure fuel pump malfunction (P1235) | Not detected |
| Fuel pressure sensor (for high pressure side) circuit malfunction (P0192, P0193) | Not detected |
| Soak timer malfunction (P2610) | Not detected |
| Auxiliary battery voltage | 8 V or higher |
| Power switch | Off |
| Soak time | 5, 7 or 9.5 hours |
| Atmospheric pressure | 76 kPa (abs) [11 psi (abs)] or higher |
STUCK MONITOR
| All of the following conditions are met | - |
| Engine coolant temperature sensor malfunction (P0115, P0117, P0118) | Not detected |
| High pressure fuel pump malfunction (P1235) | Not detected |
| Fuel pressure sensor (for high pressure side) circuit malfunction (P0192, P0193) | Not detected |
| Auxiliary battery voltage | 11 V or higher |
| Fuel cut | Off |
| High pressure fuel pump | Driving |
| Injection mode | NOT PFI (Port fuel injection) |