Removal [11/2016 - ]: Procedure
- REMOVE DECK BOARD ASSEMBLY
Refer to PROCEDURE - Step 1
- REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY
Refer to PROCEDURE - Step 2
- REMOVE DECK SIDE TRIM BOX LH
Refer to PROCEDURE - Step 3
- REMOVE REAR DECK FLOOR BOX
Refer to PROCEDURE - Step 4
- REMOVE REAR SEAT LEG COVER LH
- REMOVE REAR SEAT LEG COVER
- REMOVE REAR SEAT LEG COVER RH
HINT:
Use the same procedure as for the LH side.
- REMOVE REAR NO. 2 SEAT ASSEMBLY
- Remove the bolt to disconnect the floor anchor of the seat inner belt sub-assembly.
- Remove the bolt to disconnect the floor anchor of the rear No. 2 seat inner belt sub-assembly.
- Remove the bolt to disconnect the floor anchor of the rear No. 2 seat inner belt assembly RH.
- Remove the 3 bolts on the front side of the rear No. 2 seat assembly.
- Remove the 3 bolts on the rear side of the rear No. 2 seat assembly.
- Disconnect each connector.
- Remove the rear No. 2 seat assembly.NOTE:
Be careful not to damage the vehicle body.
- Remove the bolt to disconnect the floor anchor of the seat inner belt sub-assembly.