Removal [12/2013 - ]: Procedure
- REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for Side)
Refer to PROCEDURE - Step 14
- REMOVE FRONT NO. 2 SPEAKER ASSEMBLY (for Side) NOTE:
Do not touch the speaker cone.
HINT:
Use the same procedure for the RH side and LH side.
- REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY (for Center)
Refer to PROCEDURE - Step 21
- REMOVE FRONT NO. 3 SPEAKER ASSEMBLY (for Center) NOTE:
Do not touch the speaker cone.