LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tire Pressure Warning System (Service Information) (Hybrid) >> Tire Pressure Warning Reset Switch >> Inspection [02/2014 - ] >> Procedure

Inspection [02/2014 - ]: Procedure

  1. INSPECT TIRE PRESSURE WARNING RESET SWITCH 
    1. Remove the tire pressure warning reset switch.
      GTY441441Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Tire Pressure Warning Reset Switch)
      *b On
      *c Off

      Refer to REMOVAL [02/2014 - ] 

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 (INT) - 2 (E) On Below 1 Ω
      Off 10 kΩ or higher
scientia non olet · About LEMON Manuals