LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension (Service Information) (Hybrid) >> Front Lower Suspension Arm >> Removal [02/2014 - 11/2016] >> Procedure

Removal [02/2014 - 11/2016]: Procedure

  1. REMOVE FRONT FRAME ASSEMBLY 

    Refer to REMOVAL [02/2014 - 11/2015] , or refer to REMOVAL [11/2015 - 11/2016]

  2. REMOVE ENGINE MOUNTING INSULATOR 

    Refer to PROCEDURE - Step 53 , or refer to PROCEDURE - Step 53

  3. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY 
    1. Remove the 3 bolts, nut and front lower No. 1 suspension arm sub-assembly from the front frame assembly.
      GTY428667Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

    2. Remove the front lower arm bushing stopper from the front lower No. 1 suspension arm sub-assembly.
scientia non olet · About LEMON Manuals