Installation [11/2016 - ]: Procedure

1. Install the front lower arm bushing stopper to the front lower No. 1 suspension arm sub-assembly.
2. Install the front lower No. 1 suspension arm sub-assembly to the front frame assembly with the 3 bolts and nut in the order shown in the illustration.
   Fig 1: Tightening Sequence Of Front Lower No. 1 Suspension Arm Sub-Assembly

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Bolt (1), (2) 

   Torque: 200 N*m (2039 kgf*cm, 148 ft.*lbf) 

   Bolt (3) 

   Torque: 135 N*m (1377 kgf*cm, 100 ft.*lbf) 

   NOTE:

   Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

See step  15