Installation [02/2014 - 11/2016]: Procedure

1. Install the front seat belt anchor plate as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Install the front seat inner belt assembly RH with the nut.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Protruding Part

   Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

   NOTE:

   Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the front seat adjuster.

3. Connect the connector.
4. Engage each clamp under the front seat assembly.

Refer to INSTALLATION [02/2014 - 11/2016]