DTC C1A50: Brake System Malfunction [11/2016 - ]: Description
When the pre-collision system is operating, the driving support ECU assembly sends brake control signals to the skid control ECU assembly.
If the driving support ECU assembly receives an electronically controlled brake system malfunction signal from the skid control ECU assembly via CAN communication, DTC C1A50 will be stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1A50 | Brake System Malfunction | While the power switch is on (IG), the driving support ECU assembly receives an electronically controlled brake system malfunction signal from the skid control ECU assembly for 0.3 seconds or more. |
|