LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Restraints >> Seat Belts >> Pre-Collision System - Diagnostic Codes & Circuit Tests - (Hybrid) >> Pre-Collision System >> DTC C1A4B: Stop Light Relay Circuit [02/2014 - 11/2016] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • Inspect the fuses for circuits related to this system before performing the following procedure.
  • When this DTC is output, a malfunction in the lighting system is suspected. Check if the lighting system is functioning normally.

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [02/2014 - ]

  • When replacing the driving support ECU assembly, always replace it with a new one. If a driving support ECU assembly which was installed to another vehicle is used, the information stored in the driving support ECU assembly will not match the information from the vehicle. As a result, a DTC may be stored.