LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System (Service Information) (Hybrid) >> Occupant Classification Ecu >> Removal [02/2014 - 11/2016] >> Procedure

Removal [02/2014 - 11/2016]: Procedure

  1. REMOVE FRONT SEAT ASSEMBLY RH (for Manual Seat) 

    Refer to REMOVAL [02/2014 - 11/2016]

  2. REMOVE FRONT SEAT ASSEMBLY RH (for Power Seat) 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to REMOVAL [02/2014 - ]

  3. REMOVE OCCUPANT DETECTION ECU 
    1. Disconnect the 2 connectors.
      GTY432927Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
    2. Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the occupant detection ECU.