LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System (Service Information) (Hybrid) >> Front Seat Side Airbag Assembly >> Removal [11/2016 - ] >> Procedure

Removal [11/2016 - ]: Procedure

  1. REMOVE FRONT SEAT ASSEMBLY 

    for Manual Seat: Refer to REMOVAL [11/2016 - ]

    for Power Seat: Refer to REMOVAL [02/2014 - ]

  2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER 

    for Manual Seat: Refer to PROCEDURE - Step 4

    for Power Seat without Climate Control Seat System: Refer to PROCEDURE - Step 6

    for Power Seat with Climate Control Seat System: Refer to PROCEDURE - Step 7

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE (for Manual Seat) 

    Refer to PROCEDURE - Step 5

  4. REMOVE VERTICAL ADJUSTING HANDLE (for Driver Side Manual Seat) 

    Refer to PROCEDURE - Step 6

  5. REMOVE FRONT SEAT CUSHION SHIELD (for Manual Seat) 

    for Driver Side: Refer to PROCEDURE - Step 7

    for Front Passenger Side: Refer to PROCEDURE - Step 8

  6. REMOVE FRONT SEAT CUSHION SHIELD (for Power Seat) 

    for Driver Side: Refer to PROCEDURE - Step 10

    for Front Passenger Side: Refer to PROCEDURE - Step 11

  7. REMOVE FRONT SEAT INNER NO. 1 CUSHION SHIELD (for Power Seat) 

    Refer to PROCEDURE - Step 12

  8. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Manual Seat) 

    for Driver Side: Refer to PROCEDURE - Step 9

    for Front Passenger Side: Refer to PROCEDURE - Step 10

  9. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Power Seat) 

    for Driver Side: Refer to PROCEDURE - Step 8

    for Front Passenger Side: Refer to PROCEDURE - Step 9

  10. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY 

    for Manual Seat: Refer to PROCEDURE - Step 12

    for Power Seat: Refer to PROCEDURE - Step 19

  11. REMOVE FRONT SEAT HEADREST SUPPORT ASSEMBLY 

    for Manual Seat: Refer to PROCEDURE - Step 13

    for Power Seat: Refer to PROCEDURE - Step 20

  12. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD 

    for Manual Seat: Refer to PROCEDURE - Step 14

    for Power Seat: Refer to PROCEDURE - Step 21

  13. REMOVE FRONT SEAT AIRBAG ASSEMBLY (for Manual Seat) 
    WARNING:

    When storing the front seat airbag assembly, keep the airbag deployment side facing upward.

    1. Disengage the 2 clamps.
      GTY434923Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 nuts and front seat airbag assembly.
      WARNING:
      • The nuts must not be reused.
      • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.
  14. REMOVE FRONT SEAT AIRBAG ASSEMBLY (for Power Seat) 
    WARNING:

    When storing the front seat airbag assembly, keep the airbag deployment side facing upward.

    1. Disengage the 2 clamps.
      GTY452816Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 nuts and front seat airbag assembly.
      WARNING:
      • The nuts must not be reused.
      • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.
scientia non olet · About LEMON Manuals