DTC P321F-319: Part of HV Gate Blocking Range/Performance [02/2014 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
4. Check for DTCs.

   Powertrain > Hybrid Control > Trouble Codes 

   Result

   Proceed to
   P321E-318 is not output.
   P321E-318 is also output.

5. Turn the power switch off.

Result:  1

P321E-318 is not output. 

REPLACE INVERTER WITH CONVERTER ASSEMBLY. Refer to  COMPONENTS [02/2014 - 11/2016]  Refer to  COMPONENTS [11/2016 - ] 

Result:  2

P321E-318 is also output. 

GO TO DTC CHART (P321E-318). Refer to  DTC P321E-318: All HV Gate Blocking Range/Performance [02/2014 - 11/2016]  Refer to  DTC P321E-318: All HV Gate Blocking Range/Performance [11/2016 - ]