DTC P0A79-704: Drive Motor "B" Inverter Performance [02/2014 - 11/2016]: Description
For a description of the inverter.
Refer to DESCRIPTION
If the rear motor (MGR) torque execution value does not correspond to the torque command value from the MG ECU to rear motor (MGR), the power management control ECU will store this DTC.
HINT:
The term "drive motor B" indicates the rear motor (MGR).
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| P0A79-704 | Drive Motor "B" Inverter Performance | Rear motor (MGR) torque execution monitoring malfunction: The difference between the rear motor (MGR) torque requested by the power management control ECU and actual rear motor (MGR) torque is large. (1 trip detection logic) |
|
Comes on | Master Warning Light: Comes on |
RELATED DATA LIST
| DTC No. | Data List |
|---|---|
| P0A79-704 |
|