DTC P0A78-113: Drive Motor "A" Inverter Performance [02/2014 - 11/2015]: Description
For a description of the inverter.
Refer to DESCRIPTION
If the motor inverter overheats, has a circuit malfunction or internal short, the inverter transmits this information to the MG ECU via the motor inverter fail signal line.
HINT:
The term "drive motor A" indicates the motor (MG2).
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| P0A78-113 | Drive Motor "A" Inverter Performance | Motor inverter fail signal detected (system overcurrent): A malfunction is detected in any of the motor components (motor inverter, motor, MG ECU, etc.). (1 trip detection logic) |
|
Comes on | Master Warning Light: Comes on |