DTC P0A7A-322: Generator Inverter Performance [02/2014 - 11/2015]: Description
For a description of the inverter.
Refer to DESCRIPTION
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| P0A7A-322 | Generator Inverter Performance | Generator inverter fail signal detected (overheat): When the generator inverter temperature is excessively high. (1 trip detection logic) |
|
Comes on | Master Warning Light: Comes on |
HINT:
Other than the inverter with converter assembly, the power management control ECU or hybrid vehicle transaxle assembly may be the cause of the malfunction.
RELATED DATA LIST
| DTC No. | Data List |
|---|---|
| P0A7A-322 | Inverter Temp- (MG1) |
The following items can be helpful when performing repairs:
Data List
- MG1 (Generator) Inverter Temperature High