DTC P1606-308: Collision has been detected or Collision Sensor Connection (Open); DTC P1606-317: Collision has been detected or Collision Sensor Connection (Open) [02/2014 - 11/2016]: Description
The power management control ECU receives a signal that indicates a collision from the airbag sensor assembly to detect a collision. After detecting a collision, the power management control ECU shuts off the high voltage systems for safety.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| P1606-308 | Collision has been detected or Collision Sensor Connection (Open) | Collision detection A block signal is received from the airbag sensor assembly. (1 trip detection logic) |
|
Does not come on | Master Warning Light: Comes on |
| P1606-317 | Collision has been detected or Collision Sensor Connection (Open) | Collision detection Multiple wiring malfunctions occur simultaneously. (1 trip detection logic) |
|
Does not come on | Master Warning Light: Comes on |
HINT:
If P1606-308 or 317 is output, the hybrid system cannot be started unless the DTCs are cleared using the Techstream.
RELATED DATA LIST
| DTC No. | Data List |
|---|---|
| P1606-308 |
|
| P1606-317 |