DTC P0A7A-203: Generator Inverter Performance [11/2015 - 11/2016]: Procedure
- CHECK HYBRID VEHICLE TRANSAXLE ASSEMBLY (MG1)
See step 11
Result
Proceed to OK NG Result: 2
NG
See step 3
Result: 1
OK
See step 2
- REPLACE INVERTER WITH CONVERTER ASSEMBLY
Refer to COMPONENTS [02/2014 - 11/2016]
Result
Proceed to NEXT Result: 1
NEXT
See step 5
- REPLACE HYBRID VEHICLE TRANSAXLE ASSEMBLY
Refer to COMPONENTS [11/2015 - 11/2016]
Result
Proceed to NEXT Result: 1
NEXT
See step 4
- REPLACE INVERTER WITH CONVERTER ASSEMBLY
Refer to COMPONENTS [02/2014 - 11/2016]
Result
Proceed to NEXT Result: 1
NEXT
See step 5
- CHECK DTC OUTPUT (HYBRID CONTROL)
- Check the other DTCs that were output together with DTC P0A7A-203.
Powertrain > Hybrid Control > Trouble Codes
Result
Relevant DTC P0A7A-122, 322, 324, 325, 517, 518 Generator Inverter Performance NOTE:DTC P0A7A-203 is stored after DTC P0A7A-122, 322, 324, 325, 517 and/or 518 is stored. After troubleshooting and repairing the malfunction which caused DTC P0A7A-203 to be stored, be sure to troubleshoot all the other DTCs.
Result
Proceed to NEXT
Result: 1
NEXT
GO TO DTC CHART (HYBRID CONTROL SYSTEM). Refer to DIAGNOSTIC TROUBLE CODE CHART [11/2015 - 11/2016]
- Check the other DTCs that were output together with DTC P0A7A-203.