LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Hybrid Control System (2GR-FXS) - Diagnostic Codes (4 Of 6)) >> Hybrid Control System >> DTC U0424-537: Invalid Data Received from HVAC Control Module [11/2016 - ] >> Procedure

DTC U0424-537: Invalid Data Received from HVAC Control Module [11/2016 - ]: Procedure

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC OUTPUT (AIR CONDITIONER) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Enter the following menus: Body Electrical / Air Conditioner / Trouble Codes.
    4. Check if DTCs related to the air conditioning system (A/C) are output.

      Body Electrical > Air Conditioner > Trouble Codes 

      Result

      Proceed to
      DTCs related to A/C are not output.
      DTCs related to A/C are output.
    5. Turn the power switch off.

    Result:  1

    DTCs related to A/C are not output. 

    REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY. Refer to  COMPONENTS [02/2014 - ] 

    Result:  2

    DTCs related to A/C are output. 

    GO TO DTC CHART (AIR CONDITIONING SYSTEM). Refer to  DIAGNOSTIC TROUBLE CODE CHART [11/2016 - ]