LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Hybrid Control System (2GR-FXS) - Diagnostic Codes (4 Of 6)) >> Hybrid Control System >> DTC P0C30-390: Hybrid Battery Pack State of Charge High [11/2016 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

HINT: 

After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.

  1. When the vehicle is stopped with the power switch on (READY) and the shift lever in D, depress the accelerator pedal. The engine speed will increase as well as "State of Charge (All Bat)".

    If charge current drops, release the accelerator pedal and then depress it again to maintain charging.

  2. Check that charging stops when "State of Charge (All Bat)" reaches the upper limit.
scientia non olet · About LEMON Manuals