LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Hybrid Control System (2GR-FXS) - Diagnostic Codes (4 Of 6)) >> Hybrid Control System >> DTC P0ADC-226: Hybrid Battery Positive Contactor Control Circuit High [11/2016 - ] >> Description

DTC P0ADC-226: Hybrid Battery Positive Contactor Control Circuit High [11/2016 - ]: Description

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

Refer to the description for DTC P0AE6-225.

Refer to DESCRIPTION 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P0ADC-226 Hybrid Battery Positive Contactor Control Circuit High Open or short to +B in the SMRB circuit:
Primary circuit of SMR (+) is malfunctioning.
(2 trip detection logic)
  • Wire harness or connector
  • Hybrid battery junction block assembly
  • Hybrid vehicle control ECU assembly
 Does not come on Master Warning Light:
Comes on
RELATED DATA LIST

DTC No. Data List
P0ADC-226
  • VL-Voltage before Boosting
  • VH-Voltage after Boosting
  • Power Resource VB
  • SMRP Status
  • SMRB Status
  • SMRG Status
  • SMRP Control Status
  • SMRB Control Status
  • SMRG Control Status
  • Conv Shutdown
  • MG2 Inverter Shutdown
  • MG1 Inverter Shutdown
scientia non olet · About LEMON Manuals