LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Hybrid Control System (2GR-FXS) - Diagnostic Codes (3 Of 7)) >> Hybrid Control System >> DTC P0A7A-325: Generator Inverter Performance; DTC P0A7A-810: Generator Inverter Performance [11/2016 - ] >> Description

DTC P0A7A-325: Generator Inverter Performance; DTC P0A7A-810: Generator Inverter Performance [11/2016 - ]: Description

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

For a description of the inverter, refer to DESCRIPTION .

If an abnormal amount of current flows through the generator inverter, the MG ECU detects it and sends a signal to inform the hybrid vehicle control ECU assembly of the malfunction.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P0A7A-325 Generator Inverter Performance Generator inverter fail signal detected (overcurrent due to inverter assembly malfunction):
Overcurrent occurs in the generator inverter.*
(1 trip detection logic)
  • Inverter with converter assembly
  • Wire harness or connector
Comes on Master Warning Light:
Comes on
P0A7A-810 Generator Inverter Performance Abnormal generator inverter current value detected (inverter malfunction)
(1 trip detection logic)
  • Inverter with converter assembly
  • Wire harness or connector
Comes on Master Warning Light:
Comes on

*: The inverter with converter assembly may be suspected as a main cause of the malfunction.