Caution / Notice / Hint

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

If DTC P0A1C-710, P0A1C-797 or P1C2C-706 is output, clear the DTCs, perform the following procedure, and check that the same DTC is not output after the repair.
1. Turn the power switch on (IG) and wait for 5 seconds or more.
If DTC P1CA8-708 is output, clear the DTCs, perform the following procedure, and check that the same DTC is not output after the repair.
1. Turn the power switch on (IG) and wait for 1 minute or more.