DTC P1606-308: Collision has been detected or Collision Sensor Connection (Open); DTC P1606-317: Collision has been detected or Collision Sensor Connection (Open) [11/2016 - ]: Description
WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
The hybrid vehicle control ECU assembly receives a signal that indicates a collision from the airbag sensor assembly to detect a collision. After detecting a collision, the hybrid vehicle control ECU assembly shuts off the high voltage systems for safety.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| P1606-308 | Collision has been detected or Collision Sensor Connection (Open) | Collision detection A block signal is received from the airbag sensor assembly. (1 trip detection logic) |
|
Does not come on | Master Warning Light: Comes on |
| P1606-317 | Collision has been detected or Collision Sensor Connection (Open) | Collision detection Multiple wiring malfunctions occur simultaneously. (1 trip detection logic) |
|
Does not come on | Master Warning Light: Comes on |
HINT:
If P1606-308 or 317 is output, the hybrid system cannot be started unless the DTCs are cleared using the Techstream.
RELATED DATA LIST
| DTC No. | Data List |
|---|---|
| P1606-308 |
|
| P1606-317 |