LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Hybrid Control System (2GR-FXS) - Diagnostic Codes (2 Of 6)) >> Hybrid Control System >> DTC P0A1B-198: Drive Motor "A" Control Module [11/2016 - ] >> Description

DTC P0A1B-198: Drive Motor "A" Control Module [11/2016 - ]: Description

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

The MG ECU, which is built into the inverter with converter assembly, monitors its internal operation and will store DTCs if it detects a malfunction.

HINT: 

The term "drive motor A" indicates the motor (MG2).

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P0A1B-198 Drive Motor "A" Control Module MG ECU internal malfunction:
R/D converter NM stop error
(1 trip detection logic)
Inverter with converter assembly Comes on Master Warning Light:
Comes on