Caution / Notice / Hint

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.
1. Turn the power switch on (READY).
2. Drive the vehicle at 5 km/h (3 mph) or more for 30 seconds or more.

If DTCs are still output after replacing components of the inverter with converter assembly, replace the inverter with converter assembly.