Caution / Notice / Hint
WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
- After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.
- Turn the power switch on (READY).
- With the vehicle stopped and the shift lever in P, depress the accelerator pedal and start the engine.
- Depress the accelerator pedal and keep the engine running for 30 seconds or more.
- If DTCs are still output after replacing components of the inverter with converter assembly, replace the inverter with converter assembly.