LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Hybrid Control System (2GR-FXS) - Diagnostic Codes (2 Of 6)) >> Hybrid Control System >> DTC P0069-273: Manifold Absolute Pressure - Barometric Pressure Correlation [11/2016 - ] >> Description

DTC P0069-273: Manifold Absolute Pressure - Barometric Pressure Correlation [11/2016 - ]: Description

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

Atmospheric pressure is detected by the atmospheric pressure sensor in the MG ECU, which is built into the inverter with converter assembly, to perform optimal controls for the driving environment.

Fig 1: Manifold Absolute Pressure - Barometric Pressure Correlation
GTY734813Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P0069-273 Manifold Absolute Pressure - Barometric Pressure Correlation Difference between the atmospheric pressure value of the atmosphere pressure sensor in the inverter with converter assembly and the manifold absolute pressure sensor assembly exceeds a specified value and the same condition recurs after 3 hours or more when driving in EV drive mode.
(1 trip detection logic)
  • SFI system
  • Inverter with converter assembly
  • Manifold absolute pressure sensor
  • ECM
  • Wire harness or connector
Does not come on Master Warning Light:
Comes on
RELATED DATA LIST

DTC No. Data List
P0069-273
  • MAP
  • Atmosphere Pressure