LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Hybrid Control System (2GR-FXS) - Diagnostic Codes (3 Of 6)) >> Hybrid Control System >> DTC P0A78-121: Drive Motor "A" Inverter Performance [11/2016 - ] >> Description

DTC P0A78-121: Drive Motor "A" Inverter Performance [11/2016 - ]: Description

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

For a description of the inverter.

Refer to DESCRIPTION

If a malfunction occurs in the motor inverter or generator inverter, the MG ECU detects it and transmits this information to the hybrid vehicle control ECU assembly.

HINT: 

The term "drive motor A" indicates the motor (MG2).

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P0A78-121 Drive Motor "A" Inverter Performance Motor inverter overvoltage signal detected (overvoltage due to system malfunction):
Overvoltage is detected after boosting.
A malfunction is detected in any of the motor components (motor inverter, motor, MG ECU, etc.).
(1 trip detection logic)
  • Hybrid battery junction block assembly
  • Inverter with converter assembly
  • Service plug grip (EV battery fuse)
  • Hybrid vehicle transaxle assembly
  • Rear traction motor with transaxle assembly
  • No. 6 floor wire
  • Extension wire assembly
  • Hybrid vehicle control ECU assembly
  • PCU fuse
  • Wire harness or connector
Comes on Master Warning Light:
Comes on
RELATED DATA LIST

DTC No. Data List
P0A78-121 VH-Voltage after Boosting