LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System (2GR-FXE) (Service Information) (Hybrid) >> Radiator >> Installation [02/2014 - 11/2016] >> Procedure

Installation [02/2014 - 11/2016]: Procedure

  1. INSTALL RADIATOR ASSEMBLY 
    1. Engage the 3 guides.
    2. Engage the 3 claws to install the fan shroud assembly to the radiator assembly.
      NOTE:

      Do not damage the radiator assembly when installing the fan shroud assembly.

    3. Install the 2 radiator supports to the radiator assembly.
    4. Install the 2 lower radiator supports to the vehicle body.
    5. Install the radiator assembly with the fan shroud assembly to the 2 lower radiator supports.
  2. CONNECT RADIATOR RESERVE TANK HOSE 

    See step  6

  3. CONNECT NO. 2 RADIATOR HOSE 
    1. Connect the No. 2 radiator hose and slide the clip to secure it.
  4. CONNECT NO. 1 RADIATOR HOSE 

    See step  7

  5. INSTALL COOLER CONDENSER ASSEMBLY 

    Refer to INSTALLATION [02/2014 - 11/2016]

  6. ADD ENGINE COOLANT (for Engine) 

    See step  3

  7. INSPECT FOR COOLANT LEAK (for Engine) 

    Refer to PROCEDURE - Step 1

  8. INSTALL NO. 1 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 78 , or refer to PROCEDURE - Step 77

  9. INSTALL V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 68 , or refer to PROCEDURE - Step 67

scientia non olet · About LEMON Manuals