LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake (Service Information) (Hybrid) >> Parking Brake Switch >> Installation [02/2014 - ] >> Procedure

Installation [02/2014 - ]: Procedure

  1. INSTALL PARKING BRAKE SWITCH ASSEMBLY 
    1. Install the parking brake switch assembly to the parking brake control pedal assembly with the screw.

      Torque: 3.19 N*m (33 kgf*cm, 28 in.*lbf) 

  2. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY 

    Refer to INSTALLATION [02/2014 - 11/2016] , or refer to INSTALLATION [11/2016 - ] 

scientia non olet · About LEMON Manuals