LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) (Service Information) (Hybrid) >> Brake Stroke Simulator Cylinder >> Installation [02/2014 - ] >> Procedure

Installation [02/2014 - ]: Procedure

  1. INSTALL BRAKE STROKE SIMULATOR CYLINDER SUB-ASSEMBLY 
    1. Install the brake stroke simulator cylinder sub-assembly to the brake stroke simulator bracket with the 2 bolts.

      Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

    2. Engage the clamp to install the connector to the brake stroke simulator bracket.
  2. INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY 

    Refer to INSTALLATION [02/2014 - 11/2016] , or refer to INSTALLATION [11/2016 - ] 

scientia non olet · About LEMON Manuals