DTC C1345-66: Linear Solenoid Valve Offset Learning Undone; DTC C1368-67: Linear Solenoid Valve Offset Malfunction [02/2014 - 11/2016]: Procedure

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [02/2014 - ]

   Chassis > ABS/VSC/TRAC > Clear DTCs 

2. Turn the power switch off.
3. Turn the power switch on (IG).
4. Check the DTCs (electronically controlled brake system and hybrid control system) that are output.

   for Electronically Controlled Brake System: Refer to DTC CHECK / CLEAR [02/2014 - ]

   for Hybrid Control System: Refer to DTC CHECK / CLEAR [02/2014 - 11/2016]

   Chassis > ABS/VSC/TRAC > Trouble Codes 

   Powertrain > Hybrid Control > Trouble Codes 

   Result

   Result	Proceed to
   DTCs (except C1345-66, C1368-67 and hybrid control system DTCs) are not output.	A
   Hybrid control system DTCs are output.	B
   DTCs (except C1345-66 and/or C1368-67) are output.	C

   HINT: 

   Before performing initialization and calibration of the linear solenoid valve, C1203-95 will be output.

Result:  2

B 

INSPECT HYBRID CONTROL SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [02/2014 - ] 

Result:  3

C 

REPAIR CIRCUITS INDICATED BY OUTPUT DTCS. Refer to  DIAGNOSTIC TROUBLE CODE CHART [02/2014 - 11/2016] 

Result:  1

A 

See step  2

1. Turn the power switch off.
2. Perform initialization and calibration of the linear solenoid valve.

   Refer to INITIALIZATION [02/2014 - 11/2016]

   Chassis > ABS/VSC/TRAC > Utility 

   Tester Display
   ECB Utility

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  3

1. Turn the power switch off.
2. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [02/2014 - ]

   Chassis > ABS/VSC/TRAC > Clear DTCs 

3. Turn the power switch off.
4. Turn the power switch on (IG).
5. Check if the same DTC is output.

   Refer to DTC CHECK / CLEAR [02/2014 - ]

   Chassis > ABS/VSC/TRAC > Trouble Codes 

   Result

   Result	Proceed to
   DTCs C1345-66 and C1368-67 are not output.	A
   DTCs C1345-66 and/or C1368-67 are output.	B

Result:  1

A 

END 

Result:  2

B 

REPLACE BRAKE ACTUATOR ASSEMBLY. Refer to  REMOVAL [02/2014 - ]