Caution / Notice / Hint

NOTE:

When replacing the brake actuator assembly, perform initialization and calibration of the linear solenoid valve.

Refer to INITIALIZATION [02/2014 - 11/2016] Refer to INITIALIZATION [11/2016 - ]

HINT:

When C1364/61 is output together with C1341-62, C1342-63, C1343-64 and/or C1344-65, inspect and repair trouble areas indicated by C1364/61 first.

Refer to DTC C1246/46: Master Cylinder Pressure Sensor Malfunction; DTC C1281/81: Master Cylinder Pressure Sensor Output Malfunction (Test Mode DTC); DTC C1364/61: Wheel Cylinder Pressure Sensor Malfunction [02/2014 - ]