DTC C1202-68: Master Reservoir Level Malfunction [11/2016 - ]: Description
When a fluid level drop in the brake master cylinder reservoir assembly is detected, a signal is sent to the skid control ECU assembly.
If a DTC for the fluid level drop is stored, the warning will be canceled and the DTC will be cleared when the fluid level returns to normal.
| DTC No. |
Detection Item |
INF Code |
DTC Detection Condition |
Trouble Area |
Note |
| C1202-68 |
Master Reservoir Level Malfunction |
511
512 |
- INF Code: 511
- Either of the following is detected:
- Pump motor operates for specified period when reservoir level drops.
- Brake operation signal is input when the reservoir level is abnormal and the power switch is on (IG).
- INF Code: 512
- An open is detected in the switch signal circuit for 2 seconds or more.
|
- INF Code: 511
- Low brake fluid level
- Brake fluid leaks
- Brake fluid level warning switch (Brake master cylinder reservoir assembly) internal short circuit
- Short in wire harness
- Skid control ECU assembly
- INF Code: 512
- Brake fluid level warning switch (Brake master cylinder reservoir assembly) internal open circuit
- Open in wire harness
- Skid control ECU assembly
|
Electronically controlled brake system DTC |