LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sliding Roof - Diagnostic Codes & Symptom Tests - (Hybrid) >> Sliding Roof System >> Symptom Tests >> Remote Control System does not Operate [02/2014 - ] >> Procedure

Remote Control System does not Operate [02/2014 - ]: Procedure

  1. CHECK REMOTE CONTROL FUNCTION 
    1. Check the key-linked and wireless transmitter-linked function.

      Refer to OPERATION CHECK [02/2014 - ]

      Result Proceed to
      Both the power windows and sliding roof operate by the key-linked and wireless transmitter-linked function A
      The sliding roof does not operate by the key-linked or wireless transmitter-linked function, but all the power windows operate B
      Both the power windows and roof glass do not operate by the key-linked or wireless transmitter-linked function C

    Result: 

    A 

    USE SIMULATION METHOD TO CHECK: 

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [02/2014 - 11/2016] .

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2016 - ] .

    Result: 

    C 

    GO TO POWER WINDOW CONTROL SYSTEM 

    for Models with Jam Protection Function on 4 Windows:

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [02/2014 - ] .

    for Models with Jam Protection Function on Front Door Windows:

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [02/2014 - ] .

    Result: 

    B 

    Go to next step 

  2. CHECK SLIDING ROOF OPERATION 
    1. Check the sliding roof operation.

      Refer to OPERATION CHECK [02/2014 - ] .

      OK

      Sliding roof operates normally.

      Proceed to
      OK
      NG

    Result: 

    NG 

    GO TO OTHER PROBLEM (Sliding Roof does not Move by Operating Sliding Roof Control Switch): 

    Refer to Sliding Roof does not Move by Operating Sliding Roof Control Switch [02/2014 - ] .

    Result: 

    OK 

    Go to next step 

  3. REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY) 
    1. Replace the sliding roof ECU (sliding roof drive gear sub-assembly).

      Refer to REMOVAL [02/2014 - ] .

    Result: 

    NEXT 

    Go to next step 

  4. INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY) 
    1. Initialize the sliding roof ECU (sliding roof drive gear sub-assembly).

      Refer to INITIALIZATION [02/2014 - ] .

    Result: 

    NEXT 

    Go to next step 

  5. CHECK REMOTE CONTROL FUNCTION 
    1. Check the key-linked and wireless transmitter-linked functions.

      Refer to OPERATION CHECK [02/2014 - ] .

      OK

      The key-linked and wireless transmitter-linked functions operate normally.

      Proceed to
      OK
      NG

    Result: 

    OK 

    END (SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY) WAS DEFECTIVE) 

    Result: 

    NG 

    REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU): 

    Refer to REMOVAL [02/2014 - 11/2016] .

    Refer to REMOVAL [11/2016 - ] .