Caution / Notice / Hint

NOTE:

If the sliding roof ECU (sliding roof drive gear sub-assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear sub-assembly) must be initialized.
Refer to INITIALIZATION [02/2014 - ] .
The sliding roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [02/2014 - ] .
If the main body ECU (multiplex network body ECU) is replaced, refer to Registration:
Refer to REGISTRATION [02/2014 - 11/2016] .

Refer to REGISTRATION [11/2016 - ] .