LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Body & Frame >> Seats >> SEATS (SERVICE INFORMATION) (1 of 2) (HYBRID) >> Seat Variable Cushion Switch >> Inspection [02/2014 - ] >> Procedure

Inspection [02/2014 - ]: Procedure

  1. INSPECT SEAT VARIABLE CUSHION SWITCH 
    1. Measure the resistance according to the value(s) in the table below.
      GTY438207Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Front Switch
      *b Rear Switch
      *c Component without harness connected
      (Seat Variable Cushion Switch)

      Standard Resistance

      Tester Connection Condition Specified Condition
      2 - 5 Front switch pressed Below 1 Ω
      3 - 4
      1 - 5 Off Below 1 Ω
      3 - 4
      1 - 5 Rear switch pressed Below 1 Ω
      2 - 3

      If the result is not as specified, replace the seat variable cushion switch.

scientia non olet · About LEMON Manuals