LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Body & Frame >> Seats >> SEATS (SERVICE INFORMATION) (1 of 2) (HYBRID) >> Lumbar Switch >> Removal [02/2014 - ] >> Procedure

Removal [02/2014 - ]: Procedure

  1. REMOVE FRONT SEAT ASSEMBLY (for Driver Side) 

    Refer to REMOVAL [02/2014 - ]

  2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/o Climate Control Seat System) 

    Refer to PROCEDURE - Step 6 , or refer to PROCEDURE - Step 6

  3. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/ Climate Control Seat System) 

    Refer to PROCEDURE - Step 7 , or refer to PROCEDURE - Step 7

  4. REMOVE FRONT SEAT CUSHION SHIELD 

    Refer to PROCEDURE - Step 10 , or refer to PROCEDURE - Step 10

  5. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (w/ Seat Position Memory System) 

    Refer to PROCEDURE - Step 13 , or refer to PROCEDURE - Step 13

  6. REMOVE RECLINING POWER SEAT SWITCH KNOB (w/ Seat Position Memory System) 

    Refer to PROCEDURE - Step 14 , or refer to PROCEDURE - Step 14

  7. REMOVE POSITION CONTROL ECU AND SWITCH ASSEMBLY (w/ Seat Position Memory System) 

    Refer to PROCEDURE - Step 7 , or refer to PROCEDURE - Step 6

  8. REMOVE FRONT LUMBAR POWER SEAT SWITCH 
    1. Disengage the 4 claws to remove the front lumbar power seat switch from the front seat cushion shield.
      GTY451689Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals